1:18 CR-18P "T-Hunter BLS 2024" sand-coloured RTR

sms Se procura um produto que aparece como Esgotado Consulte-nos por favor por email, deverá indicar a referencia do produto no corpo de texto.

The CR-18P was launched on 2021 with good success with the portal axle version. Now that the car has been on the market for more than 2 years, we have received many good ideas and suggestions from our fans on how to make our cars even better.
HobbyPlus worked together with FURITEK on the new CR-18P. The vehicle was equipped with the proven FURITEK Lizard brushless ESC and the Venom brushless motor. In line with our development philosophy, the new upgrades to the chassis including the brushless system, will take the CR-18P to the next level of evolution without breaking the fans' wallets.
There are 2 body styles (Rushmore and T-Hunter) available in 2 colors each.


- 1:18 CR18P Rushmore 2024
- Furitek Lizard Lite 30A/50A Dual-Mode ESC
- Furitek VENOM 1212 3450KV Outrunner BL Motor
- ESC programming card
- 7.4V/2S LiPo 600mAh
- 4-CH Radio/Receiver
- USB Charger
- Manual
- Cross Wrench













LiPo 2S/7.4V 600mAh 1010043
Reference: AB240063
1.2 Beadlock Wheels - PRO Crawler 1:18 4un
Reference: 1010099
Body Clips 10 un
Reference: 1010013
Opt. Over Drive Portal Gear Set (20%) - EVO/GOAT 1010222 - OPTIONAL PART
Reference: AB240388
1.5kg MG Servo 1010211 - OPTIONAL PART
Reference: AB240399
Optional Alu. SOA Conversion Kit - PRO/EVO 1:18 1010148 - OPTIONAL PART
Reference: AB240299
Metal Pinion & Ring Gear - PRO Crawler 1:18 1010105
Reference: AB240208
High-Torque Servo 1kg/3-wire 1010042
Reference: AB240060
Bumper & Electronics Mount Set 1010001
Reference: AB240010
Optional Brass Wheel Hex Hubs 11g - PRO Crawler 4un - OPTIONAL PART
Reference: 1010136
Rear Axle Drive Shaft - PRO Crawler 1:18 2un
Reference: 1010110
Portal Axle Shafts - PRO Crawler 1:18 4un
Reference: 1010109
LED Light Set
Reference: 1010044
Complete Vehicle Links Set
Reference: 1010033
Bumper & Side Step Set
Reference: 1010030
Opt. Brass Front Portal Hub V2 - EVO GOAT 1010227 - OPTIONAL PART
Reference: AB240393
Opt. Brass Rear Portal Hub V2 - EVO GOAT 1010226 - OPTIONAL PART
Reference: AB240392
Opt. Alu Front Portal Hub Set V2 - EVO/GOAT 1010225 - OPTIONAL PART
Reference: AB240391
Opt. Alu BIG BORE Oil Shock Set (4) 1010220 - OPTIONAL PART
Reference: AB240339
Mount & Link Set - GOAT 1010201
Reference: AB240318
Gear Box Shaft - EVO 1:18 1010168
Reference: AB240306
Gear Box - EVO 1:18 1010166
Reference: AB240300
Extended Axle Shaft - EVO/GOAT 1010206
Reference: AB240382
Pins 1 x 4.5mm - PRO Crawler 1:18 (8) 1010111
Reference: AB240243
Body and Bumper Post Set 1010004
Reference: AB240015
Opt. Alu Rear Axle V2 - EVO/GOAT 1010224 - OPTIONAL PART
Reference: AB240348
4CH Radio & Receiver Set - GOAT 1010203
Reference: AB240332
CR18P-EVO Complete Ball Bearing Set ( 30pcs Rubber Seal ) 1010182 - OPTIONAL PART
Reference: AB240364
6X3X2.5 Ball Bearing ( 10pcs Rubber Seal ) 1010183 - OPTIONAL PART
Reference: AB240365
5X2X2.5 Ball Bearing ( 10pcs Rubber Seal ) 1010184 - OPTIONAL PART
Reference: AB240366
12X8X3.5 Ball Bearing ( 10pcs Rubber Seal ) 1010185 - OPTIONAL PART
Reference: AB240367
8X5X2.5 Ball Bearing ( 10pcs Rubber Seal ) 1010186 - OPTIONAL PART
Reference: AB240368
Optional Alu. Front Axle - PRO/EVO 1:18 1010147 - OPTIONAL PART
Reference: AB240293
1.2"" Steel Bead Lock Wheels - black (4) 1010142 - OPTIONAL PART
Reference: AB240298
1.2"" Steel Bead Lock Wheels - silver (4) 1010141 - OPTIONAL PART
Reference: AB240292
CR-18P 2024 Ball Stud & Pin Set
Reference: AB240422
Optional Alu. HC Links - PRO/EVO 1:18 1010149 - OPTIONAL PART
Reference: AB240349
Optional Brass Wheel Weight 16g - PRO Crawler (4) 1010137 - OPTIONAL PART
Reference: AB240286
Optional Brass Wheel Hex Hubs 11g - PRO Crawler (4) 1010136 - OPTIONAL PART
Reference: AB240287
T-Hunter PC Body Set (bright sand) - PRO Crawler 1:18 1010134
Reference: AB240254
T-Hunter PC Body Set (army green) - PRO Crawler 1:18 1010133 - OPTIONAL PART
Reference: AB240253
T-Hunter PC Body (army-green) - PRO Crawler 1:18 1010131 - OPTIONAL PART
Reference: AB240250
T-Hunter PC Body (unpainted) - PRO Crawler 1:18 1010130 - OPTIONAL PART
Reference: AB240252
T-Hunter Battery Box & Bumper Set - PRO Crawler 1:18 1010125
Reference: AB240272
Bumper & Side Step Set 1010030
Reference: AB240047
Opt. Over Drive Portal Gear Set (20%) - EVO/GOAT 1010222
Reference: AB240388
1.5kg MG Servo 1010211
Reference: AB240399
Optional Alu. SOA Conversion Kit - PRO/EVO 1:18 1010148
Reference: AB240299
Optional Brass Wheel Hex Hubs 11g - PRO Crawler 4un
Reference: 1010136
Opt. Brass Front Portal Hub V2 - EVO GOAT 1010227
Reference: AB240393
Opt. Brass Rear Portal Hub V2 - EVO GOAT 1010226
Reference: AB240392
Opt. Alu Front Portal Hub Set V2 - EVO/GOAT 1010225
Reference: AB240391
Opt. Alu BIG BORE Oil Shock Set (4) 1010220
Reference: AB240339
CR18P-EVO Complete Ball Bearing Set ( 30pcs Rubber Seal ) 1010182
Reference: AB240364
We have created this content to help you buy the items you need in our online shop.
Meaning of the indication of availability on the products:
"In Stock"
- Items marked " In Stock " are available in existing quantities for immediate despatch after collection, unless there is a stock shortage.
"In stock at supplier"
- Items marked " In stock at supplier" are available in existing quantities for immediate dispatch from our supplier unless there is a shortage of stock or errors on the part of the supplier.
"To Order "
- Items marked " To Order" authorised for purchase, with product availability depending on our suppliers. Ideally, you should check availability before making your purchase. You can send your message with the reference of the product you want to know the availability of here Send your message.
"Out of stock"
Products marked " Out of stock" cannot be purchased and do not have a dispatch date. This happens when the product is no longer or not yet available from our supplier.
For more information on how to buy, click here: Link to How to Buy
➡ For more information on payment methods and shipping, see here: Link to Payments and Shipping.