Maverick RC Quantum2 XT Flux 1/10th Stadium Truck - Red-MV150407 (4)
zoom_out_map
chevron_left chevron_right

Modelos Atom [Por apenas: 74.95€]

ad3.jpg

Audi 1/10 E-tron Vision GT 4wd Sport 3 RS4 [Preço: 419.95€]

New

Maverick RC Quantum2 XT Flux 1/10th Stadium Truck - Red

Maverick RC Quantum2 XT Flux 1/10th Stadium Truck - Red

€329.95 Tax included

€268.25 Tax excluded

Shipping now
check In stock
Shipped Monday.
Shipped Today.
Shipped Tomorrow.

Veja aqui o vídeo do modelo

sms Se procura um produto que aparece como Esgotado Consulte-nos por favor por email, deverá indicar a referencia do produto no corpo de texto. 

ad.jpg

Modelos Maverick Quantum [Desde 199,95€]

Security policy
Delivery policy
Recieve at home

Accessories and Parts:

Necessary Accessories

Charger LC-2.0 LiPo

Charger LC-2.0 LiPo

€16.95
Carregador APC-1 10AMP

Carregador APC-1 10AMP

€54.95
Carregador de Li-Po Cube 2.0

Carregador de Li-Po Cube 2.0

€34.95
HPI Reactor 200 Charger

HPI Reactor 200 Charger

€29.95
HPI Reactor 600 Charger 6A (EU 2 Pin)

HPI Reactor 600 Charger 6A (EU 2 Pin)

€49.95
Plazma 11.1V 5300mAh 40C LiPo Pack 58.83Wh  XT60

Plazma 11.1V 5300mAh 40C LiPo Pack 58.83Wh XT60

€59.95
Plazma 7.4V 5300mAh 40C LiPo Pack 39.22Wh  XT60

Plazma 7.4V 5300mAh 40C LiPo Pack 39.22Wh XT60

€39.95
Bateria de LiPo 4000mah 11.1V 50C Caixa dura (Dean)

Bateria de LiPo 4000mah 11.1V 50C Caixa dura (Dean)

€29.95
Greenhorn Vol.2 LOW PROFILE LiPo 11.1V-40C 4000 HC

Greenhorn Vol.2 LOW PROFILE LiPo 11.1V-40C 4000 HC

€29.95
LiPo Stick Pack 11.1V-50C 5000 Hardcase (T-Plug)

LiPo Stick Pack 11.1V-50C 5000 Hardcase (T-Plug)

€35.95
LiPo Stick Pack 11.1V-50C 5000 Hardcase (XT60)

LiPo Stick Pack 11.1V-50C 5000 Hardcase (XT60)

€35.95
Bateria de Lipo 7,4V 50C 5000mah Hardcase (T-Plug)

Bateria de Lipo 7,4V 50C 5000mah Hardcase (T-Plug)

€24.95
Bateria de Lipo 7,4V 50C 4000mah Hardcase (T-Plug)

Bateria de Lipo 7,4V 50C 4000mah Hardcase (T-Plug)

€19.95

 

 Redesigned with big speeds and great looks:

it’s the new Quantum2 XT Flux!!

The Quantum2 XT is the authentic next evolution following the successful launch of the Quantum2 MT. Retaining the same reimagined Quantum2 chassis, it boasts an impressive Truggy aesthetic. Key features include the HD wing mount with an impact-absorbing top, designed to lessen the shock experienced during crashes, seamlessly integrating with the Quantum2 rear bumper and adjustable wheelie bar!

This super-powered brushless version is fitted with a mighty 3500 KV FLUX brushless motor and 3S-capable speed controller for massive top speeds!

Available in 2 different great-looking colorways, you can choose between racing RED with black wheels or extra-bright GREEN with neon green wheels! The Quantum2 XT is also equipped with functional front and rear lights, including brake lights, controlled directly from the new MTX-400 controller.

The Quantum2 XT features a fresh addition to the Tredz line of tires - the MiXBLoK! These rugged tires are paired with new split 5 spoke XT 2.8" wheels which feature a 14mm Wheel Hex. With the Quantum2 XT, prepare to turn heads and instantly impress your friends.

The Quantum 2 XT Flux features expertly designed parts molded in robust and durable materials to keep you driving and smiling for hours at a time! From extra-thick suspension arms and one-piece uprights to thick metal axles and driveshafts spinning on real metal bearings, the Quantum 2 XT Flux is built to last! The Quantum2 bodies are completely pre-painted are crafted from robust polycarbonate — a material known for its high tensile strength and durability. Despite its strength, this material retains flexibility, making it the top choice for high-quality RC bodies!

With all- new looks, more speed and extreme durability, the Quantum2 XT Flux should be high on your list of must-have RC vehicles! 

 
 

Real Steering Wheel Controller with Light Control Included!

The brand new Maverick MTX-400 controller features a real steering wheel, just like full-size cars, plus loads of dials for fine-tuning the handling and controls of your truck! The pistol grip shape feels natural in the hand and with just a pull of the trigger you are off and running! There’s buttons to control the lighting, too: turn the lights fully on or off, or have just the brake lights on! The control is literally in your hands!

 

3500 KV Motor & Fixed Gear Motor Mount

Super-powerful brushless motors are the way to go if you’ve got some RC experience, so this is the perfect motor if you’re looking to add the Quantum2 XT to your RC fleet! You can definitely expect high top speeds and loads of action with this 3500 KV motor fitted – what do you think the wheelie bar is for?! The motor mount features fixed gearing positions so there’s no risk of getting the gear mesh wrong, should you decide to change the gearing for more torque (faster acceleration) or higher top speeds – super simple!

80A Waterproof ESC

The 80A electronic speed controller is the ideal partner for the Flux brushless motor! It’s fitted with a low-loss XT60 plug and it’s also waterproof so it’s great for blasting through mud and puddles! Please note: electronics are not designed for submerged operation. Be sure to rinse off any dirt or salt water with clean water immediately. Check the motor to make sure no water or dirt is inside, spray with electric motor cleaning spray and let dry fully before driving again.

Brush guard front bumper with built-in LED light bar!

The solid brush guard style bumper not only looks great – it’s fully functional, too! It’ll keep crash damage away from that amazing looking body, it’s a handy carrying handle, PLUS it’s fitted with extra-bright LED lights that you can turn on and off from the controller! The skid plate underneath also allows you to slide over obstacles and jumps to keep you going and the Quantum2 XT coming back for more!

 

Sturdy rear bumper with built-in LED light bar and adjustable wheelie bar!

The back bumper matches the styling of the front, plus it’s extra-thick for increased protection. You’ll also notice the huge wheelie bar right there! It’s not only got functional spinning wheels to help you keep control during speed runs, but it’s adjustable as well! Keep it low for extra control or let those front wheels fly for extra style! And of course we have to mention the bright red rear LED lights – PLUS working brake lights, which you can turn off and on from the controller!

 

 

Super stiff center chassis brace!

We have listened to Quantum owners and made tons of improvements all around the chassis! One of the many little details you’ll find on the Quantum2 XT is this extra thick brace that ties the shock tower and bulkhead together, strengthening everything into a solid unit! And to stiffen up the chassis further and strengthen it for the power of the Flux brushless system, an extra-thick aluminum rod connects the front and rear shock towers! Running straight down the center of the chassis, it is mounted at both ends with extra-thick plastic mounts and metal hardware.

 

 

Quick and efficient motor removal and adjustment!

The motor is held in place with a fixed motor clamp under a heavy duty plastic seal, protecting it from dirt, stones and other debris that could damage the spur gear. And in case you ever want to swap out the motor to give the Quantum2 XT a good clean, the motor is easily removeable with just 3 screws (and 2 more if you want to take off the motor clamp). You’ll notice that all the hardware is metric machine-thread screws as well – just another mark of steady improvement for Maverick RC!

 

 

Quick access to all-metal gear differentials for easy maintenance!

Just a handful of screws gives you quick and easy access to the differentials front and rear – just like pro racing trucks and buggies! The HD outdrives used to be an option – now, they’re standard parts! You’ll also see the metal ring gear surrounding the diff, and there’s more metal gears inside… the Quantum2 is super tough and ready for anything! The only plastic you’ll find in the diff is the outer case.

 

Dual-Pad Slipper Clutch!

Taking a cue from top-spec pro racing models, the Quantum2 XT is fitted with an extra-tough, metal dual-pad slipper clutch. This is not only super durable, it’s adjustable as well! Of course, you don’t have to adjust a thing – the whole truck will work great as-is out of the box, but if you want to do those little racer tweaks, it’s really easy to do! The Output cup for the centre shaft on the Quantum2 XT has a New "D" shape that helps prevent unwanted loss of drive to the front!

 

New TREDZ MiXBLoK tyres wrapped around new 5-Spoke wheels!

We absolutely love the all-new MiXBLoK tires from Tredz! These are bi-directional tires which work great on all surfaces: gravel, mud, dirt, on-road or off-road! Plus, check out the little hex logo lugs! These are pre-glued on extra-large newly designed wheels that look like they’re going a million miles an hour just standing still!

 

Super-strong dual-bellcrank servo saver!

Another racer touch you’ll see on the Quantum2 XT is the dual-bellcrank steering, with adjustable servo saver fitted with a thick metal spring. The cammed & sprung action of the servo saver – as well as the one-piece steering rods and durable yet flexible front suspension - helps protect the internal gears of the servo from crashes.

 

Durable front suspension!

The Quantum2 XT uses racing-style C-hub and steering blocks to give you outstanding performance on a variety of driving surfaces, letting you let your driving do the talking! The suspension parts use thick plastic where it’s best: the main suspension arm plus camber & steering links, and high-spec hubs and uprights keep the tires pointed exactly where you want them.

 

Tough rear suspension!

At the rear end, it’s the same story: super thick lower and upper suspension arms for dual-wishbone action front and rear. Only the best designs for Maverick RC drivers! And just check out the little touches you won’t see unless the wheel is removed: lightened plastic wheel hubs and even optional camber link mounts on the one-piece upright! The Quantum Flux models are fitted with gold anodised 14mm aluminum wheel hexes!

 

Strong metal suspension braces for extra strength!

To add even more the durability of the Quantum2 XT, the suspension features tough metal braces to protect the lower suspension arms. This allows the arms to do what they were designed to do, in concert with the camber and steering links and even the wheels and tires: flex when needed to absorb crash damage and keep the truck in one piece, so you can keep on driving and having fun with your friends.

 
 
 

The perfect size for bashing!

With a total length of 475mm (that’s 18.7“) and wheelbase of 285mm (11.2“), the Quantum2 XT is the perfect size to toss in your car and take to the park or local BMX or RC track for a day of fun. And the 355mm (14“) width is just narrow enough to play around with other 1/10th scale buggies and trucks but big enough to mix it up with larger scale machines you might come across!

 

MYHPI: THE ULTIMATE RESOURCE 
FOR YOUR Quantum 2

Once you've got your Quantum2 XT Flux, add it to your MYhpi garage to get direct information about what will make your car faster, more adjustable and easier to tune. Add your entire HPI and Maverick collection to your MYhpi garage so you can directly access manuals, videos, tips and help for each of your HPI cars!

 
 

#150407 Maverick Quantum2 Flux XT 1/10 4WD Shaft Driven Stadium Truck - Red

 

Features:

  • 80A Waterproof ESC with XT60 Connector
  • 3500KV Brushless Motor with 3.175mm Shaft & 14T Pinion
  • 16kg Metal Gear Water-Resistant Servo
  • 2-3S LiPo Capable ESC
  • Chassis Brace Bar
  • Aluminium Hex Hubs
  • Independent Double Wishbone Suspension
  • Oil Filled Adjustable Coilover Shocks
  • C-Hub Front & One Piece Rear Suspension Uprights
  • Oversize Durable Upper and Lower Suspension Arms
  • Metal plate insert hinge pin holders front and rear
  • Oversize M1.25 Diff Crown & Pinion Gears
  • Tough Metal 4-Gear Differentials Front & Rear
  • Quick Access Motor with Gear Cover To Keep Debris Away From The Spur Gear
  • Fixed Gear Motor Mount - Fits 12T to 16T Pinions
  • Twin Pad Slipper Clutch with 51T 32DP Spur Gear
  • Dual Point Bell Crank Steering System With Integrated Servo Saver
  • Molded Tub Chassis with Hex Pattern Reinforcement
  • Adjustable Wheelie Bar Included
  • 2.8" Wheel Design with 14mm Hex Hub Wheel Fitting
  • Tredz MiXBLoK Tires
  • Front & Rear Lights with functional Brake Light and Remote On/Off from Transmitter
  • 2.4GHz 4CH Radio Set with Waterproof Receiver
  • Pre-Cut Factory Finished And Decaled Polycarbonate Bodyshell
  • Available In Multiple Color Options


Specification:
Length: 475mm
Width: 355mm
Height: 195mm
Wheelbase: 285mm


What you need:
4 AA batteries for transmitter - HPI Recommends #101939 Plazma AA batteries
2S or 3S LiPo pack with XT-60 Plug - HPI Recommends #160161 2S LiPo or #160163 3S LiPo (Requires #160906 XT-60 to Deans adaptor)

Battery charger for car battery - HPI Recommends Reactor 600 #160236 (US) #160237 (UK), #160238 (EU), #160239 (AUS) LiPo Charge Case - HPI Recommends #160013 Plazma Pouch

 

Specification may be subject to change