Modelos Atom [Por apenas: 74.95€]
Audi 1/10 E-tron Vision GT 4wd Sport 3 RS4 [Preço: 419.95€]
Land Rover Defender Silver 1/10 TRX-4 Scale 4WD TQI
Land Rover Defender Silver 1/10 TRX-4 Scale 4WD Electric Trail Truck with TQi Traxxas Link Enabled 2.4GHz Radio System
sms Se procura um produto que aparece como Esgotado Consulte-nos por favor por email, deverá indicar a referencia do produto no corpo de texto.
Modelos Maverick Quantum [Desde 199,95€]
Accessories and Parts:
Necessary Accessories
4000mAh 11.1v 3-Cell 25C LiPo Battery
|
4000mAh 11.1v 3-Cell 25C LiPo Battery |
|
Bateria Traxxas ID 5000mah 11.1v 3-Cell 25C LiPO
|
5000mAh 11.1v 3-Cell 25C LiPo ID Battery |
|
LiPo ID Battery 5000mAh 7.4v 2-Cell 25C
|
5000mAh 7.4v 2-Cell 25C LiPo ID Battery |
|
5800mAh 7.4v 2-Cell 25C LiPo ID Battery
|
5800mAh 7.4v 2-Cell 25C LiPo ID Battery |
|
Power Tank Lipo 7,4V.-60C 7100 Hardcase (T-Plug) |
Power Tank Lipo 7,4V.-60C 7100 Hardcase (T-Plug) |
|
Power Tank Lipo 7.4V.-60C 6200 Hardcase (T-Plug) |
Power Tank Lipo 7.4V.-60C 6200 Hardcase (T-Plug) |
Spare Parts
3-in-1 wire harness, LED light kit
|
3-in-1 wire harness, LED light kit |
|
4-in-2 wire harness, LED light kit
|
4-in-2 wire harness, LED light kit |
|
|
4000mAh 11.1v 3-Cell 25C LiPo Battery
|
4000mAh 11.1v 3-Cell 25C LiPo Battery |
|
|
Bateria Traxxas ID 5000mah 11.1v 3-Cell 25C LiPO
|
5000mAh 11.1v 3-Cell 25C LiPo ID Battery |
|
|
LiPo ID Battery 5000mAh 7.4v 2-Cell 25C
|
5000mAh 7.4v 2-Cell 25C LiPo ID Battery |
|
|
5800mAh 7.4v 2-Cell 25C LiPo ID Battery
|
5800mAh 7.4v 2-Cell 25C LiPo ID Battery |
|
7600mAh 7.4v 2-Cell 25C LiPo Battery
|
7600mAh 7.4v 2-Cell 25C LiPo Battery |
|
AC to DC Power Supply Adapter
TRX-2976G
|
|
|
Adapter, Traxxas® iD® LiPo battery (adapts Traxxas iD batteries to separate balance ports)
|
Adapter, Traxxas iD LiPo battery |
|
Antenna caps, vinyl (2)/ antenna spool
|
|
|
Axle housing, front TRX4
|
|
|
Axle housing, rear TRX4
|
|
|
Axle mount set (complete) (front & rear) (for suspension links)
|
|
|
Axle shaft, front (left)/ drive pin/ cross pin
|
|
|
Axle shaft, front (right)/ drive pin/ cross pin
|
|
|
Axle shaft, front, heavy duty (left & right)/ portal drive input gear (machined) (2) (assembled)
|
|
|
Axle shaft, front, heavy duty (left & right) (requires #8064 front portal drive input gear)
|
|
|
Axle shaft, rear (left)
|
|
|
Axle shaft, rear (right)
|
|
|
Axle shaft, rear, heavy duty (left & right)/ portal drive input gear, rear (machined)
|
|
|
Axle, rear, heavy duty (left & right) (requires #8065 rear portal drive input gear)
|
|
|
Backplate screws (3x8mm hex cap) (6)/washers (6)/ wrench |
Backplate screws (3x8mm hex cap) (6)/washers (6)/ wrench |
|
Ball bearings, black rubber sealed (5x10x4mm) (2)
|
Ball bearings, black rubber sealed |
|
Ball bearings, black rubber sealed (5x11x4mm) (2)
|
Ball bearings, black rubber sealed |
|
Ball bearings, black rubber sealed (6x12x4mm) (2)
|
Ball bearings, black rubber sealed |
|
Ball bearings, black rubber sealed (10x15x4mm) (2)
|
Ball bearings, black rubber sealed |
|
Ball bearings, black rubber sealed (12x18x4mm) (2) |
Ball bearings, black rubber sealed |
|
Ball bearings, black rubber sealed (6x13x5mm) (2) |
Ball bearings, black rubber sealed |
|
Ball bearings, black rubber sealed (7x14x5mm) (2)
|
Ball bearings, black rubber sealed |
|
Ball bearings, black rubber sealed (4x10x4mm) (2)
|
Ball bearings, black rubber sealed |
|
Ball bearings, black rubber sealed (5x8x2.5mm) (2)
|
Ball bearings, black rubber sealed |
|
Bandeira de servo |
|
|
Battery charge indicators (green (4), blue (4), grey (4))
|
|
|
Battery door, transmitter (replacement for #6516, 6517, 6528, 6529,
6530 transmitters)
|
|
|
Battery strap (for 2200 2-cell and 1400 3-cell LiPo batteries)
|
|
|
Battery, Power Cell, 3000mAh (NiMH, 7-C flat, 8.4V)
|
|
|
Battery, Series 3 Power Cell, 3300mAh (NiMH, 7-C flat, 8.4V)
|
Battery, Series 3 Power Cell, 3300mAh |
|
Battery, Series 4 Power Cell, 4200mAh (NiMH, 7-C flat, 8.4V)
|
Battery, Series 4 Power Cell, 4200mAh |
|
Battery, Series 5 Power Cell, 5000mAh (NiMH, 7-C flat, 8.4V)
|
Battery, Series 5 Power Cell, 5000mAh |
|
BEC, complete (includes receiver box cover and seals)
|
|
|
Body clips, black (12) (standard size)
|
|
|
Body clips, heavy duty (12)
|
|
|
Body clips, heavy duty (black) (12)
|
|
|
Body mounts & posts, front & rear (complete set)
|
Body mounts & posts, front & rear |
|
Body reamer (plastic handle)
|
|
|
Body reamer (aluminum handle)
|
|
|
Body washers, foam adhesive (10)
|
|
|
Body with camper, TRX-4® Sport (clear, trimmed, requires painting)/ window masks/ decal sheet
|
|
|
Body, GTS shock (hard-anodized, PTFE-coated aluminum) (1)
|
|
|
Body, GTS shock, aluminum (blue-anodized) (1)
|
|
|
Body, GTS shock, aluminum (green-anodized) (1)
|
|
|
Body, GTS shock, aluminum (red-anodized) (1)
|
|
|
Body, GTS shock, long (aluminum, red-anodized) (1) (for use with #8140R TRX-4® Long Arm Lift Kit)
|
|
|
Body, GTS shock, long (aluminum, blue-anodized) (1) (for use with #8140X TRX-4® Long Arm Lift Kit)
|
|
|
Body, GTS shock, long (silver aluminum) (1) (for use with #8140 TRX-4® Long Arm Lift Kit)
|
|
|
Body, Land Rover® Defender®, adventure orange (complete with ExoCage, inner fenders, fuel canisters, and jack)
|
Body, Land Rover Defender, adventure orange |
|
Body, Land Rover Defender, complete (clear, trimmed, requires painting) (includes grille, side mirrors, door handles, windshield wipers, ExoCage, spare tire mount, decals, window masks) |
Body, Land Rover Defender, complete |
|
Body, Land Rover® Defender®, graphite silver (painted)/ decals
|
Body, Land Rover Defender, graphite silver |
|
Body, Land Rover Defender, red (painted)/ decals
|
Body, Land Rover Defender, red (painted)/ decals |
|
Body, TRX-4® Sport (clear, trimmed, requires painting)/ window masks/ decal sheet
|
|
|
Body, TRX-4® Sport (clear, trimmed, die-cut for LED light kit,
requires painting)/ window masks/ decal sheet
|
|
|
Box, receiver (sealed)/ wire cover/ foam pads/ silicone grease/ 3x8 BCS (5)/ 2.5x8 CS (2)
|
|
|
Bumper D-Rings, grey (front or rear)/ 2x12 CS (4)
|
|
|
Bumper D-rings, red (front or rear)/ 2.0x12 CS (4)
|
|
|
Bumper mounts, front & rear
|
|
|
Bumper mounts, front & rear/ screw pins (4)
|
Bumper mounts, front & rear/ screw pins |
|
Bumper, front (chrome)/ bumper mount/ 3x10 BCS (2)
|
|
|
Bumper, front/ winch
|
|
|
Bumper, rear
|
|
|
Bumper, rear (chrome)/ bumper mount/ 3x10 BCS (2)
|
|
|
Cable, T-lock (front)
|
|
|
Cable, T-lock (medium) (for use with TRX-4® Long Arm Lift Kit)
|
|
|
Cable, T-lock (rear)
|
|
|
Cable, T-lock (extra long) (for use with TRX-4® Long Arm Lift Kit)
|
|
|
Caps & spring retainers, GTS shocks (upper cap (2)/ hollow balls (4)/ bottom cap (2)/ upper retainer (2)/ lower retainer (2))
|
Caps & spring retainers, GTS shocks |
|
Carrier, differential/ differential slider/ T-Lock fork
|
Carrier, differential/ differential slider/ T-Lock fork |
|
Caster blocks (TRX-4)
|
|
|
Caster blocks, 6061-T6 aluminum (charcoal gray-anodized), left and right
|
Caster blocks, 6061-T6 aluminum |
|
Caster blocks, 6061-T6 aluminum (green-anodized), left and right
|
Caster blocks, 6061-T6 aluminum |
|
Caster blocks, 6061-T6 aluminum (blue-anodized), left and right
|
Caster blocks, 6061-T6 aluminum |
|
Caster blocks, 6061-T6 aluminum (red-anodized), left and right
|
Caster blocks, 6061-T6 aluminum |
|
Charger, DC, 4 amp (6 - 7 cell, 7.2 - 8.4 volt, NiMH) |
Charger, DC, 4 amp (6 - 7 cell, 7.2 - 8.4 volt, NiMH) |
|
Charger, EZ-Peak® Dual, 100W, NiMH/LiPo with iD® Auto Battery Identification
|
Charger, EZ-Peak Dual, 100W, NiMH/LiPo with iD Auto Battery |
|
Chassis conversion kit, TRX-4® (short to long wheelbase) (includes rear upper & lower suspension links, front & rear shock towers, long female half shaft)
|
|
|
Chassis conversion kit, TRX-4® (long to short wheelbase) (includes rear upper & lower suspension links, front & rear inner fenders, short female half shaft, battery tray, 3x8mm FCS (4))
|
|
|
Chassis rails, 448mm (steel) TRX4
|
|
|
Chavetas médias |
|
|
Communication link, telemetry expander
|
Communication link, telemetry expander |
|
Cover plate, Traxxas Link™ Wireless Module
|
Cover plate, Traxxas Link Wireless Module |
|
Cross pin (2)/ drive pin (2) (to rebuild front axle shafts)
|
|
|
Decal sheet, racing sponsors
|
|
|
Decal sheet, TRX-4® Sport
|
|
|
Decals, Land Rover® Defender®
|
|
|
Hex wrenches; 1.5mm, 2mm, 2.5mm, 3mm, 2.5mm ball
|
|
|
Differential cover, front or rear (grey)
|
Differential cover, front or rear |
|
Differential cover, front or rear (black)
|
Differential cover, front or rear |
|
Differential cover, front or rear (red)
|
Differential cover, front or rear |
|
Differential cover, front or rear (chrome-plated)
|
Differential cover, front or rear |
|
Drive hub, 2-speed/ shift dog/ shift fork/ 2-speed linkage
|
Drive hub, 2-speed/ shift dog/ shift fork/ 2-speed linkage |
|
Driveshaft extension kit, center (includes internal splined, x-long (2), internal splined, long (1) and internal splined, medium (1)) (for use with TRX-4® Long Arm Lift Kit)
|
Driveshaft extension kit, center |
|
Expedition rack, complete (includes traction boards, shovel, axe, jack, fire extinguisher, fuel cans, & mounting hardware) (fits #8111 or #8111R body)
|
|
|
Expedition rack/ mounting hardware (fits #8111 or #8111R body)
|
Expedition rack/ mounting hardware |
|
Fender brace, inner, front & rear
|
Fender brace, inner, front & rear |
|
Fender extensions (4)/ 3x8 flat-head screws (24) (requires #8080 narrow inner fenders)
|
|
|
Fenders, inner (narrow), front & rear (2 each)/ rock light covers (8)/ battery plate/ 3x8 flat-head screws (4) |
|
|
Fenders, inner, front & rear (2 each)/ rock light covers (8)/ battery plate/ 3x8 flat-head screws (4)
|
|
|
Fenders, inner, front & rear (2 each)/ rock light covers (8)
|
|
|
Floor pans, left & right
|
|
|
Fuel canisters (red) (2)/ 3x8 FCS (1)
|
|
|
Fuel canisters (black) (2)/ 3x8 FCS (1)
|
|
|
Fuel canisters (yellow) (2)/ 3x8 FCS (1)
|
|
|
Fuel canisters (blue) (2)/ 3x8 FCS (1)
|
|
|
Fuel canisters (white) (2)/ 3x8 FCS (1)
|
|
|
Gear set (for 2065 waterproof sub-micro servo)
|
Gear set (for 2065 waterproof sub-micro servo) |
|
Gear set, differential (output gears (2), spider gears (4), spider gear shaft (2))
|
|
|
Gear set, metal (for 2065X waterproof sub-micro servo)
|
|
|
Gear set, metal (for 2070, 2075 servos)
|
|
|
Gear set, metal (for 2250, 2255 servos)
|
|
|
Gear set, metal, high speed (for 2070, 2075 servos)
|
|
|
Gear set, transmission, metal (includes 18T, 30T input gears, 36T output gear, 2x9.8 pins (5))
|
|
|
Gear, 10-T pinion (32-p) (steel)/ set screw
|
|
|
Gear, 11-T Pinion (32-P) (Mach. Steel)
|
|
|
Gear, 12-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw
|
|
|
Gear, 14-T pinion (32-p), heavy duty (machined, hardened steel)/
set screw
|
|
|
Gear, 15-T pinion (32-p), heavy duty
|
|
|
Gear, 16-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw
|
|
|
Gear, 17-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw
|
|
|
Gear, 18-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw
|
|
|
Gear, 19-T pinion (32-p) (mach. steel)/ set screw (fits 3mm shaft) |
Gear, 19-T pinion (32-p) (mach. steel)/ set screw (fits 3mm shaft) |
|
Gear, 19-T pinion (32-p), heavy duty (machined, hardened steel) (fits 3mm shaft)/ set screw |
Gear, 19-T pinion (32-p), heavy duty (machined, hardened steel) (fits 3mm shaft)/ set screw |
|
Gear, 20-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw
|
|
|
Gear, 21-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw
|
|
|
Gear, 22-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw
|
|
|
Gear, 9-T pinion (32-p) (steel)/ set screw
|
|
|
Gearbox housing (includes main housing, front housing, & cover)
|
|
|
Gears, transfer case (3)
|
|
|
Grease, premium high performance (20cc)
|
Grease, premium high performance |
|
Grille, Land Rover® Defender®/ grille mount (3)/ headlight housing (2)/ lens (2)/ headlight mount (2) (fits #8011 body)
|
Grille, Land Rover Defender/ grille mount |
|
Grille/ grille retainers (2)/ grille mount/ lens (2)/ 2.5x8 BCS (6) (fits #8111 or #8112 body)
|
|
|
Half shafts (TRX-4) |
|
|
Hardware kit, stainless steel, beadlock rings (contains stainless steel hardware for 4 wheels)
|
Hardware kit, stainless steel, beadlock rings |
|
Hardware kit, stainless steel, TRX-4® (contains all stainless steel hardware used on TRX-4)
|
Hardware kit, stainless steel, TRX-4 |
|
Hardware kit, stainless steel, TRX-4® High Lift Kit (contains all stainless steel hardware used on TRX-4® Long Arm Lift Kit)
|
Hardware kit, stainless steel, TRX-4 High Lift Kit |
|
Hollow ball set, complete, TRX-4® (aluminum, PTFE-coated)
|
Hollow ball set, complete, TRX-4 |
|
Hollow ball, tall centered (2)/ tall offset hollow ball (2)/ bump steer adjustment shims; 3.5mm (2), 1.17mm (2)
|
|
|
Input shaft/ output shaft (transmission)
|
|
|
Jack (red) (1)/ 2x8 BCS (1)
|
|
|
Jack (black) (1)/ 2x8 BCS (1)
|
|
|
Kit de autocolantes TRAXXAS |
|
|
LED expedition rack scene light kit (fits #8111 body, requires #8028 power supply)
|
LED expedition rack scene light kit |
|
LED headlight/tail light kit (fits #8111 or #8112 body, requires #8028 power supply)
|
|
|
LED headlight/tail light kit TRX4
|
LED headlight/tail light kit TRX4 |
|
LED light bar (Rigid®), TRX-4 (requires #8028 power supply)
|
|
|
LED light bar, front bumper (fits #8124 front bumper, requires #8028 power supply)
|
|
|
LED light bar, roof lights (fits #8111 body, requires #8028 power supply)
|
|
|
LED light set (contains headlights, tail lights, roof lights, and distribution block) (fits #8811 or #8825 body, requires #8028 power supply)
|
|
|
LED light set Mercedes-Benz G 500 4x4, complete with power supply (contains headlights, tail lights, roof lights, & distribution block) (fits #8811 or #8825 body)
|
LED light set Mercedes-Benz G 500 4x4, complete Kit |
|
LED light set, complete with power supply (contains headlights, tail lights, & distribution block) (fits #8111 or #8112 body)
|
LED light set, complete with power supply |
|
LED light set, complete with power supply (contains headlights, tail lights, roof light bar, rock lights & distribution block) (fits #8011 body) |
|
|
LED lightbar kit (Rigid®)/power supply, TRX4
|
LED lightbar kit (Rigid®)/power supply, TRX4 |
|
LED lights, power supply (regulated, 3V, 0.5-amp)/ 3-in-1 wire harness
|
|
|
LED rock light kit, TRX-4®/TRX-6™ (requires #8028 power supply and #8018, #8072, or #8080 inner fenders)
|
LED rock light kit, TRX-4/TRX-6 |
|
Link Bluetooth Wireless Module TQi
|
Link Bluetooth Wireless Module TQi |
|
LiPo cell voltage checker/balancer (includes #2938X adapter for Traxxas® iD® batteries)
|
LiPo cell voltage checker/balancer |
|
LiPo cell voltage checker/balancer (requires #2938X adapter for Traxxas® iD® batteries)
|
LiPo cell voltage checker/balancer |
|
Long Arm Lift Kit, TRX-4®, complete (includes red powder coated links, red-anodized shocks)
|
Long Arm Lift Kit, TRX-4, complete |
|
Long Arm Lift Kit, TRX-4®, complete
|
Long Arm Lift Kit, TRX-4, complete |
|
Long Arm Lift Kit, TRX-4®, complete (includes blue powder coated links, blue-anodized shocks)
|
Long Arm Lift Kit, TRX-4, complete |
|
Marine grease, 30cc
|
|
|
Mirrors, side (left & right)/ snorkel/ mounting hardware (fits #8111 or #8112 body)
|
|
|
Mirrors, side (left & right)/ snorkel/ mounting hardware (fits #8011 body)
|
|
|
Motor mount plate TRX-4 6061-T6 aluminium Charcoal
|
Motor mount plate TRX-4 6061-T6 aluminium Charcoal |
|
Motor mount plate, 6061-T6 aluminum (green-anodized)
|
Motor mount plate, 6061-T6 aluminum |
|
Motor mount plate, 6061-T6 aluminum (blue-anodized)
|
Motor mount plate, 6061-T6 aluminum |
|
Motor mount plate, 6061-T6 aluminum (red-anodized)
|
Motor mount plate, 6061-T6 aluminum |
|
Mount, telemetry expander (fits TRX-4®)
|
|
|
Multi-tool (plastic)
|
|
|
Nuts, 4mm flanged nylon locking, serrated (black) (10)
|
Nuts, 4mm flanged nylon locking, serrated |
|
Nuts, aluminum, flanged, serrated (4mm) (pink-anodized) (4)
|
Nuts, aluminum, flanged, serrated |
|
Nuts, aluminum, flanged, serrated (4mm) (green-anodized) (4)
|
Nuts, aluminum, flanged, serrated |
|
Nuts, aluminum, flanged, serrated (4mm) (blue-anodized) (4)
|
Nuts, aluminum, flanged, serrated |
|
Oil, shock (40 wt, 500 cSt, 60cc) (silicone)
|
|
|
Oil, shock (50 wt, 600 cSt, 60cc) (silicone)
|
|
|
Oil, shock (60 wt, 700 cSt, 60cc) (silicone)
|
|
|
Oil, shock (70 wt, 900 cSt, 60cc) (silicone)
|
|
|
Oil, shock (80 wt, 1,000 cSt, 60cc) (silicone)
|
|
|
Oil, shock (20 wt, 200 cSt, 60cc) (silicone)
|
|
|
Oil, shock (30 wt, 350 cSt, 60cc) (silicone)
|
|
|
Output drive, transmission or differential (pin retainer (1)/ drive cup (1)/ drive ball (1)/ drive pin (1)/ 3x11 screw pin (1)/ cross pin (black)
(1) 3x6 BCS with threadlock (1))
|
Output drive, transmission or differential |
|
Output gear, high range, 24T (metal)
|
|
|
Output shafts (transfer case), front & rear
|
|
|
Parafusos 2.5x8 (6) |
|
|
Parafusos 3x10 (4) |
|
|
Parafusos 3x10 (6) |
|
|
Parafusos 3x15 (6) |
|
|
Parafusos 3x6 (6) |
|
|
Parafusos 3x8 (6) |
|
|
Piston, damper (red) (4)/ e-clips (8)
|
|
|
Plate, motor/ upper spur gear cover
|
Plate, motor/ upper spur gear cover |
|
Porcas autofrenadas 4mm |
|
|
Portal drive axle mount, rear (left & right)
|
|
|
Portal drive axle mount, rear, 6061-T6 aluminum (charcoal gray- anodized) (left and right)/ 2.5x16 CS (4)
|
Portal drive axle mount, rear, 6061-T6 aluminum |
|
Portal drive axle mount, rear, 6061-T6 aluminum (green- anodized) (left and right)/ 2.5x16 CS (4)
|
Portal drive axle mount, rear, 6061-T6 aluminum |
|
Portal drive axle mount, rear, 6061-T6 aluminum (blue-anodized) (left and right)/ 2.5x16 CS (4)
|
Portal drive axle mount, rear, 6061-T6 aluminum |
|
Portal drive axle mount, rear, 6061-T6 aluminum (red-anodized) (left and right)/ 2.5x16 CS (4)
|
Portal drive axle mount, rear, 6061-T6 aluminum |
|
Portal drive housing, inner, front (left & right)/ 2.5x4 BCS (6)
|
Portal drive housing, inner, front |
|
Portal drive housing, inner, rear (left or right) (2)
|
Portal drive housing, inner, rear (left or right) (2) |
|
Portal drive housing, inner, rear (left or right) (2)
|
Portal drive housing, inner, rear (left or right) (2) |
|
Portal drive input gear, front (machined) (left or right) (requires #8060 front axle shaft)
|
Portal drive input gear, front |
|
Portal drive input gear, front/ drive pin/ cross pin
|
Portal drive input gear, front/ drive pin/ cross pin |
|
Portal drive input gear, rear |
|
|
Portal drive input gear, rear (machined) (left or right) (requires #8063 rear axle)
|
|
|
Portal drive output gear, front or rear
|
Portal drive output gear, front or rear |
|
Portal housings, inner (front), 6061-T6 aluminum (charcoal gray- anodized) (2)/ 3x12 BCS (2)
|
|
|
Portal housings, inner (front), 6061-T6 aluminum (red-anodized) (2)/ 3x12 BCS (2)
|
|
|
Portal housings, inner (front), 6061-T6 aluminum (green- anodized) (2)/ 3x12 BCS (2)
|
|
|
Portal housings, inner (front), 6061-T6 aluminum (blue-anodized) (2)/ 3x12 BCS (2)
|
|
|
Portal housings, inner (rear), 6061-T6 aluminum (charcoal gray- anodized) (2)/ 2.5x10 CS (2)
|
|
|
Portal housings, inner (rear), 6061-T6 aluminum (red-anodized) (2)/ 2.5x10 CS (2)
|
|
|
Portal housings, inner (rear), 6061-T6 aluminum (green- anodized) (2)/ 2.5x10 CS (2)
|
|
|
Portal housings, inner (rear), 6061-T6 aluminum (blue-anodized) (2)/ 2.5x10 CS (2)
|
|
|
Portal housings, outer, 6061-T6 aluminum (charcoal gray- anodized) (2)/ 2.5x10 CS (12)
|
Portal housings, outer, 6061-T6 aluminum |
|
Portal housings, outer, 6061-T6 aluminum (red-anodized) (2)/ 2.5x10 CS (12)
|
Portal housings, outer, 6061-T6 aluminum |
|
Portal housings, outer, 6061-T6 aluminum (green-anodized) (2)/ 2.5x10 CS (12)
|
Portal housings, outer, 6061-T6 aluminum |
|
Portal housings, outer, 6061-T6 aluminum (blue-anodized) (2)/ 2.5x10 CS (12)
|
Portal housings, outer, 6061-T6 aluminum |
|
PTFE-coated washers, 5x8x0.5mm (20) (use with ball bearings)
|
PTFE-coated washers, 5x8x0.5mm |
|
Push bar, bumper (chrome) (fits #8069 bumper)
|
|
|
QuicRun WP1080-G2 Crawler Brushed ESC 80A, BEC 4A
|
QuicRun WP1080-G2 Crawler Brushed ESC 80A, BEC 4A |
|
Rádio TQi 2.4GHz (2-Channel) TSM
|
Rádio TQi 2.4GHz (2-Channel) TSM |
|
Rebuild kit, GTS shocks (x-rings, o-rings, pistons, bushings, e-clips, and rod ends)
|
|
|
Rebuild kit, slipper clutch (steel disc (2)/ friction insert (2)/ 4.0mm NL (1)/ spring washers (4), metal washer (1))
|
|
|
Receiver box cover (for use only with #8224 receiver box & #2260 BEC)/ foam pads/ seals/ silicone grease
|
|
|
Receiver, micro, TQi 2.4GHz with telemetry & TSM (5-channel)
|
Receiver, micro, TQi 2.4GHz with telemetry & TSM |
|
Ring gear, differential/ pinion gear, differential (machined)
|
Ring gear, differential/ pinion gear, differential |
|
Ring gear, differential/ pinion gear, differential (overdrive, machined)
|
Ring gear, differential/ pinion gear, differential |
|
Ring gear, differential/ pinion gear, differential (underdrive, machined)
|
Ring gear, differential/ pinion gear, differential |
|
Ring gear, differential/ pinion gear, differential
|
Ring gear, differential/ pinion gear, differential |
|
Rock sliders, left & right
|
|
|
Rod end set, complete (standard (10), angled 10-degrees (8), offset (4))
|
|
|
Rod ends (10)
|
|
|
Rod ends, angled 10-degrees (TRX-4)
|
|
|
Rod ends, extended (standard (4), angled (4))/ hollow balls (8) (for use with TRX-4® Long Arm Lift Kit)
|
|
|
Rod ends, long (6)/ hollow ball connectors (6) |
Rod ends, long (6)/ hollow ball connectors (6) |
|
Rod ends, offset (4)
|
|
|
Roof basket (requires #8016 ExoCage) (fits #8011 body)
|
|
|
Scissors, curved tip
|
|
|
Scissors, straight tip
|
|
|
Screw pin, 3x10mm (6)
|
|
|
Screws, 2.5x10mm cap-head machine (hex drive) (6)
|
Screws, 2.5x10mm cap-head machine |
|
Screws, 2.5x10mm countersunk machine (hex drive) (6)
|
Screws, 2.5x10mm countersunk machine |
|
Screws, 2.5x12mm cap-head machine (6)
|
Screws, 2.5x12mm cap-head machine |
|
Screws, 2.5x16mm cap-head machine (6)
|
Screws, 2.5x16mm cap-head machine |
|
Screws, 2.5x6mm cap-head machine (hex drive) (6)
|
Screws, 2.5x6mm cap-head machine (hex drive) (6) |
|
Screws, 2.5x8mm button-head machine (hex drive) (6)
|
Screws, 2.5x8mm button-head machine |
|
Screws, 2.5x8mm countersunk machine (hex drive) (6)
|
Screws, 2.5x8mm countersunk machine |
|
Screws, 2.6x12mm button-head, self-tapping (hex drive) (6)
|
Screws, 2.6x12mm button-head, self-tapping |
|
Screws, 2x10mm cap-head, self-tapping (hex drive) (10)
|
Screws, 2x10mm cap-head, self-tapping |
|
Screws, 2x8mm cap-head machine (hex drive) (6)
|
Screws, 2x8mm cap-head machine |
|
Screws, 3x12mm button-head machine (hex drive) (6)
|
Screws, 3x12mm button-head machine |
|
Screws, 3x23mm button-head machine (hex drive) (6)
|
Screws, 3x23mm button-head machine |
|
Screws, 3x25mm button-head machine (hex drive) (6)
|
Screws, 3x25mm button-head machine |
|
Screws, 3x27mm button-head machine (hex drive) (6)
|
Screws, 3x27mm button-head machine |
|
Screws, 3x30mm button-head machine (hex drive) (6)
|
Screws, 3x30mm button-head machine |
|
Screws, 3x6mm flat-head machine (hex drive) (6)
|
Screws, 3x6mm flat-head machine |
|
Screws, 3x8mm flat-head machine (hex drive) (6)
|
Screws, 3x8mm flat-head machine |
|
Screws, 4x16mm button-head machine (hex drive) (6)
|
Screws, 4x16mm button-head machine |
|
Seal kit, expander box (includes o-ring, seals, and silicone grease)
|
|
|
Seal kit, receiver box (includes o-ring, seals, and silicone grease)
|
|
|
Sensor de Temperatura e Voltagem |
Sensor de Temperatura e Voltagem |
|
Sensor, auto-detectable, temperature
|
Sensor, auto-detectable, temperature |
|
Sensor, auto-detectable, voltage
|
Sensor, auto-detectable, voltage |
|
Servo case, aluminum (red-anodized) (middle) (for 2255 servo)
|
|
|
Servo case, aluminum (blue-anodized) (middle) (for 2250 servo)
|
|
|
Servo case, plastic (top, middle, bottom)/ gaskets/ hardware (for 2250, 2255 servos)
|
|
|
Servo case/gaskets (for 2065 waterproof sub-micro servo)
|
|
|
Servo case/gaskets (for 2065X metal gear, waterproof, sub-micro servo)
|
|
|
Servo horn, steering, metal/ 3x14 BCS TRX4
|
Servo horn, steering, metal/ 3x14 BCS TRX4 |
|
Servo mount, 2-speed/ servo mount, T-Lock/ wire clips
|
Servo mount, 2-speed/ servo mount, T-Lock/ wire clips |
|
Servo mount, steering (for use with TRX-4® Long Arm Lift Kit)
|
|
|
Servo mount, steering/ chassis crossmember
|
Servo mount, steering/ chassis crossmember |
|
Servo sub-micro waterproof metal gear
|
Servo sub-micro waterproof metal gear |
|
Servo, digital high-speed, metal gear (ball bearing), waterproof
|
Servo, digital high-speed, metal gear |
|
Servo, digital high-torque 330 coreless, metal gear (ball bearing), waterproof (#2262 external BEC and #8247X metal servo horn recommended for optimal performance)
|
Servo, digital high-torque 330 coreless, metal gear |
|
Servo, digital high-torque 400 brushless, metal gear (ball bearing), waterproof (#2262 external BEC and #8247X metal
servo horn recommended for optimal performance)
|
Servo, digital high-torque 400 brushless, metal gear |
|
Servo, digital high-torque, metal gear (ball bearing), waterproof
|
Servo, digital high-torque, metal gear |
|
Servo, sub-micro, waterproof
|
|
|
Shim set, 3x7x1mm (2), 3x6x0.5mm (4), 3x7x2mm (2)/ hollow balls, captured (4)
|
|
|
Shock oil set (includes 20 wt, 30 wt, 40 wt, 50 wt, 60 wt, 70 wt, & 80 wt premium shock oils with spinning carousel rack)
|
|
|
Shock shaft, 3x47mm (GTS) (2)
|
|
|
Shock shaft, 3x47mm (GTS) (titanium nitride-coated) (2)
|
|
|
Shock shaft, 3x57mm (GTS) (2) (includes bump stops) (for use with TRX-4® Long Arm Lift Kit)
|
|
|
Shock towers, front & rear (left & right)
|
|
|
Shocks, GTS hard-anodized, PTFE-coated aluminum bodies with TiN shafts (assembled with spring retainers) (2)
|
Shocks, GTS hard-anodized, PTFE-coated aluminum bodies with |
|
Shocks, GTS, aluminum (red-anodized) (assembled without springs) (4) (for use with #8140R TRX-4® Long Arm Lift Kit)
|
|
|
Shocks, GTS, aluminum (blue-anodized) (assembled with spring retainers) (2)
|
|
|
Shocks, GTS, aluminum (blue-anodized) (assembled without springs) (4) (for use with #8140X TRX-4® Long Arm Lift Kit)
|
|
|
Shocks, GTS, aluminum (green-anodized) (assembled with spring retainers) (2)
|
|
|
Shocks, GTS, aluminum (red-anodized) (assembled with spring retainers) (2)
|
|
|
Shocks, GTS, silver aluminum (assembled without springs) (4) (for use with #8140 TRX-4® Long Arm Lift Kit)
|
|
|
Shocks, GTS, silver aluminum TRX4
|
Shocks, GTS, silver aluminum TRX4 |
|
Shovel/ axe/ accessory mount/ mounting hardware
|
Shovel/ axe/ accessory mount/ mounting hardware |
|
Silicone shock oil (30 wt), 60cc
|
|
|
Skidplate/ lower gear cover
|
|
|
Slipper eliminator plate
|
|
|
Spare tire mount/ mounting bracket/ screw pins (2)
|
Spare tire mount/ mounting bracket/ screw pins |
|
Spare tire mount/ mounting hardware
|
Spare tire mount/ mounting hardware |
|
Speed Bit Essentials Set, hex and nut driver, 7-piece, includes premium handle (medium), travel pouch, hex drivers (straight: 1.5mm, 2.0mm, 2.5mm) and nut drivers (5.0mm, 5.5mm, 7.0mm, and 8.0mm), 1/4” drive
|
Speed Bit Essentials Set, hex and nut driver, 7-piece, inclu |
|
Speed bit handle, medium (one piece)
|
|
|
Speed bit handle, premium, large (rubber overmold)
|
Speed bit handle, premium, large |
|
Speed bit handle, premium, medium (rubber overmold)
|
Speed bit handle, premium, medium |
|
Speed Bit Master Set, hex and nut driver, 13-piece, includes premium handle (medium), travel pouch, hex drivers (straight: 1.5mm, 2.0mm, 2.5mm, 3.0mm), (ball-end: 2.0mm, 2.5mm, 3.0mm), and nut drivers (4.00mm, 4.50mm, 5.00mm, 5.50mm, 7.00mm, 8.00mm),
|
Speed Bit Master Set, hex and nut driver, 13-piece, includes |
|
Speed Bit Master Set, hex driver, 7-piece straight and ball end, includes premium handle (medium), travel pouch, hex drivers (straight: 1.5mm, 2.0mm, 2.5mm, 3.0mm) (ball end: 2.0mm, 2.5mm, 3.0mm), 1/4" drive
|
Speed Bit Master Set, hex driver, 7-piece straight and ball |
|
Speed Bit Master Set, nut driver, 6-piece, includes premium handle (medium), travel pouch, and nut drivers (4.0mm, 4.5mm, 5.0mm, 5.5mm, 7.0mm, 8.0mm), 1/4" drive
|
Speed Bit Master Set, nut driver, 6-piece, includes premium |
|
Speed Bit Set, hex driver, 2-piece ball-end (2.0mm, 2.5mm), 1/4" drive
|
Speed Bit Set, hex driver, 2-piece ball-end |
|
Speed Bit Set, hex driver, 3-piece ball-end (2.0mm, 2.5mm, 3.0mm), 1/4" drive
|
Speed Bit Set, hex driver, 3-piece ball-end |
|
Speed Bit Set, hex driver, 3-piece straight (1.5mm, 2.0mm, 2.5mm), 1/4" drive
|
Speed Bit Set, hex driver, 3-piece straight |
|
Speed Bit Set, hex driver, 4-piece straight (1.5mm, 2.0mm, 2.5mm, 3.0mm), 1/4" drive
|
Speed Bit Set, hex driver, 4-piece straight |
|
Spinning carousel rack
|
|
|
Spool/ differential housing plug/ e-clip
|
Spool/ differential housing plug/ e-clip |
|
Springs, shock (natural finish) (GTS) (0.54 rate, green stripe) (2)
|
|
|
Springs, shock (natural finish) (GTS) (0.22 rate, yellow stripe) (2)
|
|
|
Springs, shock (natural finish) (GTS) (0.61 rate, blue stripe) (2)
|
|
|
Springs, shock (natural finish) (GTS) (0.30 rate, white stripe) (2)
|
|
|
Springs, shock (natural finish) (GTS) (0.45 rate) TRX4
|
|
|
Springs, shock, long (natural finish) (GTS) (0.29 rate, white stripe) (for use with TRX-4® Long Arm Lift Kit)
|
|
|
Springs, shock, long (natural finish) (GTS) (0.39 rate, orange stripe) (for use with TRX-4® Long Arm Lift Kit)
|
|
|
Springs, shock, long (natural finish) (GTS) (0.47 rate) (included with TRX-4® Long Arm Lift Kit)
|
|
|
Springs, shock, long (natural finish) (GTS) (0.54 rate, green
stripe) (for use with TRX-4® Long Arm Lift Kit)
|
|
|
Springs, shock, long (natural finish) (GTS) (0.62 rate, blue stripe) (for use with TRX-4® Long Arm Lift Kit)
|
|
|
Spur gear, 39-tooth (32-pitch)
|
|
|
Spur gear, 45-tooth TRX4 |
|
|
Steering link, 5x117mm (1)/ draglink, 5x60mm (1)/ panhard link, 5x63mm (red powder coated steel) (assembled with hollow balls) (for use with #8140R TRX-4® Long Arm Lift Kit)
|
|
|
Steering link, 5x117mm (1)/ draglink, 5x60mm (1)/ panhard link, 5x63mm (blue powder coated steel) (assembled with hollow balls) (for use with #8140X TRX-4® Long Arm Lift Kit)
|
|
|
Steering link, 5x60mm/ draglink, 5x117mm (TRX-4)
|
Steering link, 5x60mm/ draglink, 5x117mm |
|
Stub axle (portal drive) (2)
|
|
|
Stub axle, extended (portal drive) (2)
|
|
|
Suporte de Sensor de Temperatura |
Suporte de Sensor de Temperatura |
|
Suspension link, front upper, 5x68mm (1) (red powder coated steel) (assembled with hollow balls) (for use with #8140R TRX-4® Long Arm Lift Kit)
|
Suspension link, front upper, 5x68mm |
|
Suspension link, front upper, 5x68mm (1) (blue powder coated steel) (assembled with hollow balls) (for use with #8140X TRX-4® Long Arm Lift Kit)
|
Suspension link, front upper, 5x68mm |
|
Suspension link, front upper, 5x68mm (1) (steel) (assembled with hollow balls) (for use with #8140 TRX-4® Long Arm Lift Kit)
|
Suspension link, front upper, 5x68mm |
|
Suspension link, front, 5x100mm (TRX-4)
|
Suspension link, front, 5x100mm |
|
Suspension link, front, 5x63mm (TRX-4)
|
Suspension link, front, 5x63mm |
|
Suspension link, rear, 5x109mm (upper or lower) (steel) (2)
|
Suspension link, rear, 5x109mm |
|
Suspension link, rear, 5x121mm (TRX-4)
|
Suspension link, rear, 5x121mm |
|
Suspension links, front lower (2) (5x104mm, steel) (assembled with hollow balls) (for use with #8140 TRX-4® Long Arm Lift Kit)
|
|
|
Suspension links, front lower, blue (2) (5x104mm, powder coated steel) (assembled with hollow balls) (for use with #8140X TRX-4® Long Arm Lift Kit)
|
Suspension links, front lower, blue |
|
Suspension links, front lower, red (2) (5x104mm, powder coated steel) (assembled with hollow balls) (for use with #8140R TRX-4® Long Arm Lift Kit)
|
Suspension links, front lower, red |
|
Suspension links, rear lower (2) (5x115mm, steel) (assembled with hollow balls) (for use with #8140 TRX-4® Long Arm Lift Kit)
|
|
|
Suspension links, rear lower, blue (2) (5x115mm, powder coated steel) (assembled with hollow balls) (for use with #8140X TRX-4® Long Arm Lift Kit)
|
Suspension links, rear lower, blue |
|
Suspension links, rear lower, red (2) (5x115mm, powder coated steel) (assembled with hollow balls) (for use with #8140R TRX-4® Long Arm Lift Kit)
|
Suspension links, rear lower, red |
|
Suspension links, rear upper (2) (5x115mm, steel) (assembled with hollow balls) (for use with #8140 TRX-4® Long Arm Lift Kit)
|
|
|
Suspension links, rear upper, blue (2) (5x115mm, powder coated steel) (assembled with hollow balls) (for use with #8140X TRX-4® Long Arm Lift Kit)
|
Suspension links, rear upper, blue |
|
Suspension links, rear upper, red (2) (5x115mm, powder coated steel) (assembled with hollow balls) (for use with #8140R TRX-4®
Long Arm Lift Kit)
|
Suspension links, rear upper, red |
|
Tail light housing (2)/ lens (2)/ decals (left & right) (fits #8011 body)
|
|
|
Tail light lens (2)/ tail light housing (2)/ tail light hous
|
|
|
Tailgate panel/ tailgate retainers (2)/ tailgate mount/ tail light lens
(2) (left & right)/ 2.5x8 BCS (4) (fits #8111 or #8112 body)
|
Tailgate panel/ tailgate retainers |
|
Telemetry expander 2.0 and GPS module 2.0, TQi radio system
|
Telemetry expander 2.0 and GPS module 2.0, TQi radio system |
|
Telemetry expander 2.0, TQi radio system (for use only with #6551X GPS module)
|
Telemetry expander 2.0, TQi radio system |
|
Telemetry GPS module 2.0, TQi radio system (for use only with #6550X telemetry expander)
|
Telemetry GPS module 2.0, TQi radio system |
|
Tires and wheels, assembled (Method 105 2.2” black chrome beadlock wheels, Canyon Trail 5.3x2.2” tires, foam inserts) (1
left, 1 right)
|
|
|
Tires and wheels, assembled, glued (TRX-4® Sport 2.2” wheels, Canyon Trail 5.3x2.2” tires) (2)
|
Tires and wheels, assembled, glued |
|
Tires, Canyon Trail 5.3x2.2”/ foam inserts (2)
|
Tires, Canyon Trail 5.3x2.2/ foam inserts |
|
Tool set with pouch (includes 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4mm drivers/ 4mm, 5mm, 5.5mm, 7mm and 8mm nut drivers/ 2mm, 4mm, and 5mm slotted screwdrivers/ #00 Phillips, #0 Phillips, and #1 Phillips screwdrivers/ 4mm and 8mm wrench/ driver handle
|
|
|
TQi 2.4 GHz High Output radio system, 4-channel with Traxxas Link™ Wireless Module, TSM (4-ch transmitter, 5-ch micro receiver)
|
TQi 2.4 GHz High Output radio system, 4-channel with Traxxas |
|
Traction boards, blue/ mounting hardware
|
Traction boards, blue/ mounting hardware |
|
Traction boards, green/ mounting hardware
|
Traction boards, green/ mounting hardware |
|
Traction boards, yellow/ mounting hardware
|
Traction boards, yellow/ mounting hardware |
|
Traction boards/ mounting hardware
|
Traction boards/ mounting hardware |
|
Transmission gears, single speed, metal
|
Transmission gears, single speed, metal |
|
Transmitter, TQi Traxxas Link enabled, 2.4GHz high output, 4-channel (transmitter only)
|
Transmitter, TQi Traxxas Link enabled 2.4GHz 4Ch |
|
Traxx, TRX-4 (4) (complete set, front & rear)
|
|
|
Traxxas Trx-4 Brass Portal Cover Set
|
Traxxas Trx-4 Brass Portal Cover Set |
|
Traxxas TRX-4 Chevrolet K10 Cheyenne High Trail Edition - Red |
Traxxas TRX-4 Chevrolet K10 Cheyenne High Trail Edition - Red |
|
Traxxas Trx-4 Stainless Steel Center Gearbox Bottom Protector |
Traxxas Trx-4 Stainless Steel Center Gearbox Bottom Protector |
|
Traxxas Trx-4 Stainless Steel F/r Gearbox Bottom Protector
|
Traxxas Trx-4 Stainless Steel F/r Gearbox Bottom Protector |
|
Traxxas Trx-4 Steel Front Chassis Protector
|
Traxxas Trx-4 Steel Front Chassis Protector |
|
Traxxas Trx-4 Steel Rear Chassis Protector
|
Traxxas Trx-4 Steel Rear Chassis Protector |
|
Tray, battery
|
|
|
TRX4 ExoCage, Land Rover Defender (complete)
|
TRX4 ExoCage, Land Rover Defender |
|
Fender flares, front & rear (2 each)
|
TRX4 Fender flares, front & rear |
|
TRX4 Motor, Titan 550, reverse rotation (21-t/ 14 v) |
TRX4 Motor, Titan 550, reverse rotation (21-t/ 14 v) |
|
Tubo de antena |
|
|
Weight, portal housing, brass (34 grams) (2)/ 2.5x8 CS (6) (requires #8251X, 8251R, 8251A, or 8251G outer portal housing)
|
|
|
Wheel hubs, 12mm hex (2)/ stub axle pins (2) (steel) |
Wheel hubs, 12mm hex (2)/ stub axle pins (2) (steel) |
|
Wheel hubs, 12mm hex, 6061-T6 aluminum (charcoal gray- anodized) (4)/ screw pin (4)
|
Wheel hubs, 12mm hex, 6061-T6 aluminum |
|
Wheel hubs, 12mm hex, 6061-T6 aluminum (green-anodized) (4)/ screw pin (4)
|
Wheel hubs, 12mm hex, 6061-T6 aluminum |
|
Wheel hubs, 12mm hex, 6061-T6 aluminum (red-anodized) (4)/ screw pin (4)
|
Wheel hubs, 12mm hex, 6061-T6 aluminum |
|
Wheel hubs, 12mm hex, 6061-T6 aluminum (blue-anodized) (4)/ screw pin (4)
|
Wheel hubs, 12mm hex, 6061-T6 aluminum |
|
Wheels, Method 105 2.2" (black chrome, beadlock) (beadlock rings sold separately)
|
|
|
Wheels, Method 105 2.2" (charcoal gray, beadlock) (beadlock rings sold separately)
|
|
|
Winch kit with wireless controller, TRX-4 |
Winch kit with wireless controller, TRX-4 |
|
XL-5HV 3s Electronic Speed Control, waterproof (low-voltage detection, fwd/rev/brake)
|
XL-5HV 3s Electronic Speed Control, waterproof |
|
Y-harness, BEC
|
|
Land Rover Defender Silver 1/10 TRX-4 Scale 4WD Electric Trail Truck with TQi Traxxas Link Enabled 2.4GHz Radio System
TRX-82056-4S
In this space you will learn how to buy the items you need in our online store.
Meaning of the indication in the availability of the products:
"In stock"
- Items marked In Stock are available in existing quantities for immediate dispatch after payment is made, unless stocks are out of stock.
"Latest items in stock"
- Items with indication Last items in stock are available less than 2 existing units for immediate dispatch after payment is made, unless stocks are out of stock.
“Out-of-Stock”
- Items with indication Out-of-Stock is allowed to make the purchase and their availability depends on our suppliers. The ideal would be to confirm availability through our contacts before making your purchase.
➡ For more information on how to buy here: Link to How to Buy.
➡ For more information about payment and shipping methods, see here: Link to Payments and Shipping.
Write your review
- Review sent
- Your comment has been submitted and will be available once approved by a moderator.
- Your review cannot be sent
feedback Report comment