Modelos Atom [Por apenas: 74.95€]
Audi 1/10 E-tron Vision GT 4wd Sport 3 RS4 [Preço: 419.95€]
60-Amp Pro Switch-Mode BEC Brushless ESC V2: EC3
sms Se procura um produto que aparece como Esgotado Consulte-nos por favor por email, deverá indicar a referencia do produto no corpo de texto.
Modelos Maverick Quantum [Desde 199,95€]
Product Details
Key Features
- Up to 60 amps continuous current with proper air flow and 75 amps burst current (15 seconds)
- 5A continuous current, 5V switch-mode BEC circuit (proper cooling and airflow required)
- Stronger BEC for support of most 3-axis stabilization systems
- Drive up to 7 analog or 6 digital standard-sized servos with the BEC on any recommended input voltage
- 3- to 6-cell Li-Po, 9 to 18-cell Ni-MH/Ni-Cd input voltage
- Finned heat sinks
- Programmable motor braking
- Safe power-arm mode prevents accidental starts
- Programmable low voltage cutoff with settings for 3-cell Li-Po (9V), 4-cell Li-Po (12V), 5-cell Li-Po (15V), 6-cell Li-Po (18V) or 74% of battery starting voltage
- Programmable throttle input range (1.1ms-1.9ms or 1.2ms-1.8ms)
- Programmable soft start for helis and airplanes
- Auto motor shut down if signal is lost or there is interference
- Programmable timing—5 user-selectable ranges for use with a large variety of brushless motors
- Utilizes new smaller MOSFET technology to minimize weight
- Radio system power on/off switch
- Pre-wired connectors—E-flite® EC3™ connector on battery input and 3.5mm gold bullet connectors on motor output leads
Overview
The E-flite® 60-Amp Pro Switch-Mode BEC Brushless ESC (V2). This is a high-quality sensorless brushless electronic speed control with an integrated switch-mode BEC that is very lightweight and efficient. It can operate without the need for a separate receiver battery to power your servos and receivers, saving you weight and complication.
If you are purchasing this ESC to replace the ESC in your Carbon-Z Cub SS (EFL12450/EFL12475) or the Carbon-Z Cessna 150 (ELF1450/EFL1475) you will need the DYNC0029 adapter
Product Specifications
| Amperage | 60A |
| Brakes | Yes - Programmable |
| Connector Type | EC3 |
| Input Voltage | 10.8V - 22.2V |
| Maximum Burst Current | 15 sec @ 75A |
| Output Connector | 3.5mm Bullet |
| Part Type | Electronics |
| Programmable | Yes |
| Wire Gauge | 13 AWG |
We have created this content to help you buy the items you need in our online shop.
Meaning of the indication of availability on the products:
"In Stock"
- Items marked " In Stock " are available in existing quantities for immediate despatch after collection, unless there is a stock shortage.
"In stock at supplier"
- Items marked " In stock at supplier" are available in existing quantities for immediate dispatch from our supplier unless there is a shortage of stock or errors on the part of the supplier.
"To Order "
- Items marked " To Order" authorised for purchase, with product availability depending on our suppliers. Ideally, you should check availability before making your purchase. You can send your message with the reference of the product you want to know the availability of here Send your message.
"Out of stock"
Products marked " Out of stock" cannot be purchased and do not have a dispatch date. This happens when the product is no longer or not yet available from our supplier.
For more information on how to buy, click here: Link to How to Buy
➡ For more information on payment methods and shipping, see here: Link to Payments and Shipping.
feedback Report comment